The Stereo Enhancer contains various filters and processors to alter and enrich the stereo image of the input sound.

The Stereo Separation parameter lets you increase or decrease the stereo separation of the input signal. It won't have effect in mono input. The value ranges from 0% (turned maximum to right) to 200% (turned maximum to left). At 0% separation the signal becomes mono, at 100% the stereo image remains unaltered.
 
PRE/POST switch - Lets you choose if you want the phase offset effect applied before the other filters in that plugin (PRE) or after the other filters (POST).
 
Invert switch - With this filter you can invert the phase in one of the audio channels. NONE disables the effect, LEFT inverts the left audio channel, RIGHT inverts the right audio channel.

Panning wheel (PAN) - Lets you set the panning of the output. When used with small delays, the phase offset effect can make the sound seem panned to left or right. Then you can use this wheel to compensate for this effect.
 
Volume wheel (VOL) - Lets you set the volume of the output. In some cases the stereo separation filter may decrease on increase the volume of the output, then you can use this wheel to compensate for this effect.

	Try it out !
	The Stereo Enhancer is part of our Mastering Pack you can download a demo here.